PT205 Series可燃?xì)怏w傳感器

價格
電議

型號
PT205 Series可燃?xì)怏w傳感器

品牌
美國PemTech

所在地
上海市 普陀區

更新時間
2019-03-01 03:25:03

瀏覽次數
次

    產品描述：



    Microprocessor based modular design
    Industry standard 4-20mA output
    LED Status Indicator
    12-24 VDC Power input
    Reverse polarity protection
    Class I Div 1 Suitable for use in Hazardous Location
    Simple Calibration
    Description
    Model PT205 sensor is designed to detect combustible hydrocarbons vapors in air and provides an analog output signal. PT205 uses catalytic beads sensor to detect combustible vapors in % LEL.
    The complete sensor consists of a stainless steel sensor head assembly a user connection board and a transmitter board assembly. All of the sensor electronics are enclosed in an explosion proof instrument box. The unit’s modular design allows easy maintenance troubleshooting and high reliability. The low power microprocessor based sensor transmitter provides a 4-20mA analog signal proportional to 0 – of the detection range of the sensor. Also an LED indicator on the transmitter board provides sensor status and fault condition.
    Specifications
    Sensor Type
    Continuous diffusion Catalytic Bead
    Measuring Range
    0 to 100 % LEL
    Accuracy
    ± 2 % LEL
    Zero Drift
    < 5% of Full Scale per year
    Response Time
    T50 < 10 seconds
    T90 < 30 seconds with LEL methane gas applied
    Classification
    Class I division 1 Groups BC & D
    Operating Temperature
    -40°F to +158°F (-40°C to +70°C)
    Operating Humidity
    10% to 90% RH non-condensing
    Mechanical Specifications
    Length: 7 inches (178 mm)
    Width: 5 inches (127 mm)
    Height: 4 inches (101 mm)
    Status Indicators
    LED indicator of sensor status and Fault condition.
    Approvals
    Certified to CSA requirement of use in Hazardous area. Performance test: ISA-S12.13-Part I-1995
    Input Power
    14-28 VDC. 24 VDC nominal
    Power Consumption
    110mA @ 24 VDC typical
    Analog Output
    Linear 4-20mA (300 Ohms max. load)
    < 1.0 mA - Sensor malfunction
    Cable Requirement
    3 wire shielded cable. Max loop resistance of
    20 Ohms @ 24 VDC nominal
    Cable Entry Hub
    Microprocessor based modular design
    Industry standard 4-20mA output
    LED Status Indicator
    12-24 VDC Power input
    Reverse polarity protection
    Class I Div 1 Suitable for use in Hazardous Location
    Simple Calibration
    Description
    Model PT205 sensor is designed to detect combustible hydrocarbons vapors in air and provides an analog output signal. PT205 uses catalytic beads sensor to detect combustible vapors in % LEL.
    The complete sensor consists of a stainless steel sensor head assembly a user connection board and a transmitter board assembly. All of the sensor electronics are enclosed in an explosion proof instrument box. The unit’s modular design allows easy maintenance troubleshooting and high reliability. The low power microprocessor based sensor transmitter provides a 4-20mA analog signal proportional to 0 – of the detection range of the sensor. Also an LED indicator on the transmitter board provides sensor status and fault condition.
    Specifications
    Sensor Type
    Continuous diffusion Catalytic Bead
    Measuring Range
    0 to 100 % LEL
    Accuracy
    ± 2 % LEL
    Zero Drift
    < 5% of Full Scale per year
    Response Time
    T50 < 10 seconds
    T90 < 30 seconds with LEL methane gas applied
    Classification
    Class I division 1 Groups BC & D
    Operating Temperature
    -40°F to +158°F (-40°C to +70°C)
    Operating Humidity
    10% to 90% RH non-condensing
    Mechanical Specifications
    Length: 7 inches (178 mm)
    Width: 5 inches (127 mm)
    Height: 4 inches (101 mm)
    Status Indicators
    LED indicator of sensor status and Fault condition.
    Approvals
    Certified to CSA requirement of use in Hazardous area. Performance test: ISA-S12.13-Part I-1995
    Input Power
    14-28 VDC. 24 VDC nominal
    Power Consumption
    110mA @ 24 VDC typical
    Analog Output
    Linear 4-20mA (300 Ohms max. load)
    < 1.0 mA - Sensor malfunction
    Cable Requirement
    3 wire shielded cable. Max loop resistance of
    20 Ohms @ 24 VDC nominal
    Cable Entry Hub
    以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，儀器儀表交易網對此不承擔任何保證責任。
    溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。

    其他推薦產品

    PKF2.0無線電踏板力計
    PKF2.0無線電踏板力
    電議
    PK-PKH系列踏板力計
    PK-PKH系列踏板力計
    電議
    SKM1.0閉合力計
    SKM1.0閉合力計
    電議
    ZW8.0掛秤
    ZW8.0掛秤
    電議
    ZW 6.0掛秤
    ZW 6.0掛秤
    電議
    ZW5.0掛秤
    ZW5.0掛秤
    電議
    ZW 2.1掛秤
    ZW 2.1掛秤
    電議
    您是不是在找:
    氧氣檢測儀可燃性氣體檢測儀一氧化碳檢測儀二氧化碳檢測儀硫化氫檢測儀二氧化氮檢測儀一氧化氮檢測儀二氧化硫檢測儀氯氣檢測儀氫氣檢測儀氯化氫檢測儀酒精檢測儀多種氣體檢測儀汽車尾氣分析儀有毒有害氣體監測儀氣體采樣器煙氣分析儀甲醛分析儀粉塵測定儀臭氧檢測儀其他氣體分析儀

    首頁| 關于我們| 聯系我們| 友情鏈接| 廣告服務| 會員服務| 付款方式| 意見反饋| 法律聲明| 服務條款