The AT500, a laser vibration meter, enables non-contact sensing by the optical heterodyne method. It integrates a sensor unit with a built-in laser tube and a demodulator, so it has a wide range of uses in manufacturing, investigations, research, and development.
Two models to meet various requirements
AT500-05
For case vibration, Motor vibration
AT500-20
For opticalpickup, Actuator
Ease of installation
The AT500 can be easily installed. A laser beam can be focused on the measuring spot simply by installing the AT500 horizontally. Necessary operations and displays are located on the front, which provides user-friendly operation.
Highly accurate vibration measurement for soft or light s
Non-contact vibration measurement achieves high accuracy without affecting the vibration of the .
Vibration measurement for small structures
As the diameter of a laser beam spot is very small (approx. 20μm when measured at close range), the vibration of very small structures can be measured.
Easy positioning of focus and reflected light
The dedicated, highly sensitive lens enables comparatively easy sensing, even for a material that dose not reflect a laser beam well. Moreover, the built-in auto-focus function automatically selects the optimum focal point.
Scalable functions
As the AT500 has a single range demodulating function, measurement is enabled simply by connecting it to the output terminal. Connecting to AT3700 or AT3600 demodulation unit, which can be purchased separately, enables a wider range of measurement
GRAPHTEC 日圖 非接觸式 多普勒激光測振儀 AT500
Graphtec AT500, AT0023, AT7500 Laser Vibrometer
The AT500, a laser vibration meter, enables non-contact sensing by the optical heterodyne method. It integrates a sensor unit with a built-in laser tube and a demodulator, so it has a wide range of uses in manufacturing, investigations, research, and development.
Two models to meet various requirements
For case vibration, Motor vibration
For opticalpickup, Actuator
Ease of installation
The AT500 can be easily installed. A laser beam can be focused on the measuring spot simply by installing the AT500 horizontally. Necessary operations and displays are located on the front, which provides user-friendly operation.
Highly accurate vibration measurement for soft or lights
Non-contact vibration measurement achieves high accuracy without affecting the vibration of the.
Vibration measurement for small structures
As the diameter of a laser beam spot is very small (approx. 20μm when measured at close range), the vibration of very small structures can be measured.
Easy positioning of focus and reflected light
The dedicated, highly sensitive lens enables comparatively easy sensing, even for a material that dose not reflect a laser beam well. Moreover, the built-in auto-focus function automatically selects the optimum focal point.
Scalable functions
As the AT500 has a single range demodulating function, measurement is enabled simply by connecting it to the output terminal. Connecting to AT3700 or AT3600 demodulation unit, which can be purchased separately, enables a wider range of measurement
運用Terodain法,以非接觸方式,通過光測定物體微小振動現象的激光多普勒振動儀。可用于檢測加速度拾音器等接觸型振動儀無法測定的極小物體或輕量物體、或旋轉光盤表面等。
以CD/FDD/HDD等拾音器為代表,廣泛用于音響儀器的振動解析、汽車、成套設備、微型機器等相關諸多領
域。以與測定物相匹配的傳感器單元實現小型·輕量化,提高操作性,并配備3種解調裝置,充分確保了系統的擴展性。
測定范圍廣、用途多 在DC~2MHz的測定頻率范圍內,可進行從靜止狀態過渡特性到勻速運動測定、高頻率振動測定。此外,測定速度范圍可達0.4μm/s~10m/s(速度下限值 5kHz L.P.F),可在各領域進行振動測定。
搭載微積分功能
搭載微積分功能,可對激光多普勒振動儀速度信號進行微分并變換為加速度量、或實行積分并變換為位移量。(速度/位移/加速度 可同時輸出)
充實的選項功能
內置有可供選擇的寬帶解調功能(L-012),測定頻率范圍上限可達10MHz,可進行范圍更廣的測定。
以CD/FDD/HDD等拾音器為代表,廣泛用于音響儀器的振動解析、汽車、成套設備、微型機器等相關諸多領
域。以與測定物相匹配的傳感器單元實現小型·輕量化,提高操作性,并配備3種解調裝置,充分確保了系統的擴展性。
傳感器單元
提高靈敏度,清晰呈現復雜的測定條件
與傳統機型相比,測定靈敏度提高2倍以上。這樣,便可測量迄今為止難以測定的物體振動。
搭載微積分功能
搭載微積分功能,可對激光多普勒振動儀的速度信號進行微分并變換為加速度量、或實行積分并變換為位移量。(速度/位移/加速度 可同時輸出)
測定范圍廣、用途多 在DC~2MHz的測定頻率范圍內,可進行從靜止狀態過渡特性到勻速運動測定、高頻率振動測定。此外,測定速度范圍可達0.4μm/s~10m/s(速度下限值 5kHz L.P.F),可在各領域進行振動測定。
搭載微積分功能
搭載微積分功能,可對激光多普勒振動儀速度信號進行微分并變換為加速度量、或實行積分并變換為位移量。(速度/位移/加速度 可同時輸出)
充實的選項功能
內置有可供選擇的寬帶解調功能(L-012),測定頻率范圍上限可達10MHz,可進行范圍更廣的測定。
AT2002A(訂購生產)
將速度范圍鎖定為單范圍(20-2m/s/V),為*適合光選擇測定的解調裝置。通過與激光管內置型傳感器單元【AT0023】組合,可制成高靈敏度、方便使用的系統。
在DC~1.3MHz的測定頻率范圍內,可進行從靜止狀態過渡特性到勻速運動的測定、高頻率振動測定。此外,測定速度范圍可達0.4μm/s~8μm/s(5kHz L.P.F),可在各種領域進行振動測定。
配備可供各種用途及測定對象選擇的解調裝置,充分考慮系統的擴展性。
搭載可對激光多普勒振動儀速度信號進行微分并變換為加速度量、或實行積分并變換為位移量的微積分功能。*